Buy the 2015 Old Farmer's Almanac!

How to Fix Those Little Cracks in Drywall, Plaster, Concrete, and Brick

Cracks, depending on where in the house they are, the material involved, and their size, can be anything from a charming irregularity—to a repairable blemish—to a sign of impending structural collapse. Follow our basic guide to fixing minor cracks in drywall, plaster, concrete, and brick.

Minor cracks in drywall or plaster

  • Minor cracks in drywall or plaster are easy to patch with patching plaster or drywall compound.
  • Patching plaster comes as a dry powder and has to be mixed with water to the consistency of soft-serve ice cream.
  • Drywall compound is best purchased premixed in several sizes. The standard five-gallon plastic bucket of drywall compound (or "mud," as it's called in the trade) contains much more than you may need and won't keep for more than a few months, but is inexpensive and will give you plenty of material to practice with.
  • Before you can patch you'll need to widen narrow cracks enough so that the patching material can fill the crack, rather than simply covering it and leaving an unsightly bulge.
  • You can use the corner of a putty knife or any other improvised tool, but one of the best is an old-fashioned "church key" of sort once used for opening cans of beer. Just drag the point along small cracks to make them into narrow, V-shaped grooves.
  • Brush the dust out, and mist plaster (but not drywall) cracks with water to prevent the dry plaster from sucking all of the moisture from the patching material and causing it to become too stiff to work.
  • Finally, use a broad-bladed putty knife to fill the prepared cracks with patching material or joint compound.

Non-expanding cracks in poured concrete

  • Use a hammer and cold chisel (a chisel with a wedge-sharped point, called a cape chisel, works best) to widen the crack enough to admit the patching material.
  • Undercut the edges to provide a good bonding surface. Several types of patching materials are available. To save money, mix up a batch of portland cement mortar, which comes in 50-pound bags, and press it into the prepared cracks with a steel trowel.
  • Don't use your hands; cement is extremely caustic, and even relatively brief exposure can cause severe skin burns.

Cracks in brick or concrete block

  • These can be repaired in the same way as cracks in poured concrete, although you should be careful not to chisel deeper than 3/4-inch or so into a block, or you risk punching the chisel into the block's hollow core.
  • Chisel out the cracked joints to a depth of about 1/2 inch, and fill with portland cement mortar.
  • Once the mortar has set for two or three hours, fashion smooth concave joints by running a jointing tool (a short length of 1/2-inch copper tubing bent into a gentle S shape works well) over the partially set mortar.

How to tell if a crack in concrete is growing

  • Find a scrap of thin glass and glue it across the crack with five-minute epoxy or super glue. (If the masonry is damp, dry the area you'll be gluing with a flame from a propane torch first.)
  • At the same time, mark a pencil line perpendicular to the crack at that point, and measure its width to the nearest 64th of an inch.
  • Wait a few months and have another look. If the glass has broken, you'll know that the crack has opened further, and by taking another measurement you'll know by how much it has widened.


Related Articles

More Articles:


@Sylvia Griffin as explained

By fortunerestoration

@Sylvia Griffin as explained if you are having a consistent problem with your dry wall, even after repair; it could be a problem of the house settling down. Since this is not always uniform process, you must get the house inspected. If this is not a problem, then you must seek professional assistance to repair the wall properly once and for all.

We have an area in our

By Sylvia Griffin

We have an area in our drywall that cracks every year, even after we repair it in the correct manner. This has been going on for about 5 years now. We have done everything we know of to prevent this. Can you give us any suggestions that may stop this?

Thank you,
Sylvia & Charles Griffin

Post new comment

Before posting, please review all comments. Due to the volume of questions, Almanac editors can respond only occasionally, as time allows. We also welcome tips from our wonderful Almanac community!

The content of this field is kept private and will not be shown publicly.
By submitting this form, you accept the Mollom privacy policy.

2015 Special Edition Garden GuideCooking Fresh with The Old Farmer's AlmanacThe Almanac Monthly Digital MagazineWhat the heck is a Garden Hod?