For daily wit & wisdom, get the Almanac newsletter.

Snake Plant Care: How to Grow and Care for Mother-in-Law’s Tongue Indoors

Image Credit:
Myroslava Bozhko/Shutterstock
Botanical Name
Dracaena spp. (formerly: Sansevieria spp.)
Sun Exposure
Full Sun
Partial Sun
Shade
Soil pH
Neutral
Flower Color
White
Plant Type
Houseplants
Written By: Catherine Boeckmann Executive Digital Editor and Master Gardener

Tough, stylish, and nearly indestructible—snake plants (a.k.a. Mother-in-Law’s Tongue) are the ultimate low-maintenance houseplant. Whether you’re a first-time plant parent or a seasoned green thumb, this striking succulent is your go-to for clean air and effortless greenery. Here’s how to keep it thriving in your home!

About Snake Plants

Native to southern Africa, snake plants are well adapted to conditions similar to those in southern regions of the United States. Because of this, they may be grown outdoors almost all year in USDA Zone 8 and warmer. However, they spread by sending out underground runners and may become invasive, so treat snake plants like you would bamboo; plant them only in contained areas or pots.

Too much water and freezing temperatures are two of the very few things that can affect this plant in a significant way. Soggy soil will cause root rot, and extended exposure to cold temperatures can damage the foliage.

Planting

How to Plant Snake Plants

  • Choose a pot with a drainage hole in the bottom. Terracotta pots work well for snake plants since they allow the soil to dry out more quickly than plastic pots.
  • Use a well-draining potting mix. A potting mix designed for cacti and succulents is ideal, as it will be more resistant to becoming oversaturated with water.
  • When repotting snake plants, don’t bury them too deep. The plant should be planted as deep as it had been in its prior container.

Choosing a Location in the Home

  • Snake plants prefer bright, indirect light and can even tolerate some direct sunlight. However, they also grow well (albeit more slowly) in shady corners and other low-light areas of the home.
    • Tip: Avoid moving your plant from a low-light area to direct sunlight too quickly, as this can shock the plant. Whenever you move plants from a darker to a lighter spot, gradually expose them to brighter and brighter light over a week or so. Also, be sure to adjust watering habits accordingly; plants will use more water in warmer, brighter areas.
  • Keep the plant in a warm spot with temperatures above 50°F (10°C). In the winter, protect it from drafty windows.
Potted snake plants in a nursery
Photo by Mokkie/Wikimedia Commons

Growing

How to Water Snake Plants

One of the most common problems encountered with snake plants (and other succulents) is overwatering. These plants do not tolerate soggy soil; they tend to develop root rot. To avoid this, follow these watering practices:

  • Do not water too frequently. Let the soil mostly dry out between waterings.
    • Tip: To know when it’s time to water, don’t just rely on how the surface of the soil looks. Instead, carefully stick your finger or a wooden chopstick a couple of inches into the soil. Hold off watering if you feel any moisture or see soil sticking to the chopstick.
  • Water from the bottom of the pot, if possible. This encourages the roots to grow downward and deep, helping to stabilize the thick, tall leaves.
  • During the winter, while the plant isn’t actively growing, water less often than you would in spring and summer.

Caring for Snake Plants

  • The large, flat leaves tend to collect dust; wipe them down with a damp cloth as needed.
  • Snake plants are rapid growers in good conditions and may need to be divided annually.
  • Divide and repot in the spring. Cut out a section containing leaves and roots and place it in a pot with a well-draining potting mix.
  • If a snake plant is pot-bound, it may flower occasionally. Fragrant, greenish-white flower clusters appear on tall spikes.

Pests and Problems

  • Root rot due to overwatering is the most common issue.
    • If this occurs, remove any dying leaves and allow the plant to dry out more than usual. Snake plants are resilient and typically recover. However, if the plant continues to die, remove it from its pot, discard any rotted roots and leaves, and repot in fresh soil.
  • Scale insects

Types

  • Dracaena trifasciata (aka Sansevieria trifasciata) is the most common species of snake plant. It has tall, dark-green leaves with light grayish-green horizontal stripes.
    • ‘Bantel’s Sensation’ — Narrow leaves have white vertical stripes and grow to about 3 feet long. This variety can be hard to find.
  • D. hahnii:
    • ‘Bird’s Nest’ — Short, wide leaves of dark and light green form a tight nest shape like a bromeliad. Leaves only grow 6 to 8 inches long. This variety does need much light to grow well.
    • ‘Golden Hahnii’ — Like the standard ‘Bird’s Nest’ but with leaves variegated along the edge in yellow.
  • D. cylindrica:
    • ‘Cylindrical Snake Plant’ — As its name suggests, this species of snake plant has cylindrical leaves that end in a fierce point.
    • ‘Starfish Snake Plant’ — The starfish snake plant has cylindrical leaves that fan out from its base, giving it a starfish-like shape.
  • D. masoniana:
    • ‘Whale Fin’ — These interesting snake plants have large, wide leaves that resemble the fin of a whale breaching the water’s surface.

Wit and Wisdom

  • According to NASA research, snake plants, spider plants, and peace lilies are reportedly very effective at cleaning the air, removing toxins such as formaldehyde. However, further studies are needed to determine the true extent of these plants’ air-purifying capabilities!
  • Dracaena trifasciata, a type of snake plant native to tropical Africa, yields a strong plant fiber and was once used to make bowstrings for hunting. For this reason, it also goes by the name “Bowstring Hemp.” 

Houseplant Guides

About The Author

Catherine Boeckmann

Catherine Boeckmann

Executive Digital Editor and Master Gardener

Catherine Boeckmann loves nature, stargazing, and gardening so it’s not surprising that she and The Old Farmer’s Almanac found each other. She leads digital content for the Almanac website, and is also a certified master gardener in the state of Indiana.

Read more from Catherine Boeckmann

More Like This

Comments

<span>Samantha</span> Mon, 02/27/2023 - 22:21
55 years ago when my daughter was born, my husbands buddies from college sent me a snake plant. I cannot tell youhaw many people have received "pups" from this plant and it goes on and on. I can also be propagated by cutting a leaf and sticking that in damp vermiculite or even just water and placing in indirect light where it will root and also go on and on if cared for properly.
<span>Marizon</span> Mon, 02/27/2023 - 15:30
Snake plants Please check, the name of this plant was changed to Dracaena Trifasciata. Please update your article. Thank you, M
<span>Kitty</span> Tue, 02/28/2023 - 09:02
Who Changed the name to Dracaena. It has never been a Dracaena. It is considered a Succulent and a member of the Lilly Family, hence the low watering needs. People make up names. But all my books and research do not say it is a Dracaena. Sansevierias are a native of Africa more particularly, laurentii is native of the N.E. Congo in Africa. "Variegated snake plant" or "Goldband Sansevieria" It can grow to 1/2 to 1-1/2 meters high.
<span>Kitty</span> Tue, 02/28/2023 - 09:32
Well I did some more research and according to the The Angiosperm Phylogeny Group, they are using DNA to reidentify plants. ARGGG! "The Genus FKA Sansevieria was reclassified in 2014 by scientists Pei-Luen Lu and Clifford Morden after a phylogenetic analysis of the genera (plural of genus) Dracaena, Sansevieria, They found that Sansevieria is a unique group, but that it is descended from Dracaena." So all you growers out there, change your plant tags! LOL
<span>Kitty</span> Mon, 02/27/2023 - 07:48
The variety shown in the photos with the yellow stripes on the sides of the plant are: Sansevieria trifasciata laurentii. I don't know why FA doesn't label their photos of variety, and zones if applicable. Having a Horticulture Degree and I am finding plants in nursery's with less and less information and it is frustrating. I need to know, Zone, Hight, Width, sun and watering, and full variety of plants. Growers aren't supplying this information and it is wrong to assume people know how to plant and were to plant.
<span>Sheilah Perry-…</span> Mon, 02/27/2023 - 07:13
My snake pkant grows in a full bucket of water!
<span>Amina Dauda</span> Tue, 03/22/2022 - 02:40
It will help the beginers to understand more easily as a result of this guide.But i have an issue with planting a German seeds , i plants more than 5 times the seeds will spoiled instead of germination .pls i need your guide.
<span>Arslan Ali</span> Thu, 03/17/2022 - 18:27
I recently shifted to my new house I was adjusting my plants from one place to other but somehow my snake plant start getting dull, then I found out I was messing its diurnal cycle. I also own many Calathea and they have the same issue but I was aware of Snake plant. You haven't shared any reason or scientific value why it happens please add it when you get time. Be a part of green revolution and do your best.
<span>Samantha Gray</span> Sun, 03/13/2022 - 19:46
I was given my first snake plant in a dish of tiny houseplants when my daughter was born. It survived but never grew no matter what I did and then one day the dish broke, I put it in it's own pot and you could almost hear the huge sigh of relief and "Thank you!" It grew huge, and i still have the great-grandchildren of that original plant. I've given away many shoots to friends and colleagues. I water mine weekly and it does fine. It blooms in the summer heat and sends up stalks of tiny whiteish flowers which smell (yo me at least!) like crayons. I love this plant best out of all I have.
<span>Alastair</span> Sun, 04/16/2023 - 07:11
The first one I watered from the top and I killed it. The second it was ok as I watered it from the bottom but now the leafs are droopy and some are drying out at the bottom and drying out and cutting off the water supply to the leaf can some one help. I water it approximately every 3 weeks ( when there is no water in the bottom of the container )