How to Properly Display the American Flag
More Like This
Hi, Jim: This is a great question, thanks! Ideally, a flag mounted on a wall should have a dowel or rod running through its (folded over) top edge, which is then affixed to the wall either directly or hung via a cord from a single point. If your flag does have a stitched channel for a rod along its short side, such as could be used for mounting on a staff (you slide the staff into it), then mounting this flag vertically by using this channel would be preferable to mounting it horizontally. Of course, this is not always possible, which is what your question is about. Assuming that your flag does not have grommets on the short side which you could hang on nails or similar (which would be perfectly OK), the answer to your question is that when affixing directly through the cloth, you need to use a fastener that (1) provides the most security, (2) creates the least damage, (3) affects the smallest area, and (4) creates the least chance for damage/tearing. In other words, use as few of something small and strong as possible. Also, be sure that the middle of the top does not sag. Thanks for your patriotism!
Hi, Joseph: Thanks for asking this question that is pondered by many establishments but asked by few. The answer is yes ... sort of. The key thing here is respect for the flag, which you obviously have. In places such as bars and organization halls, it is important that the flag be somewhat isolated so that it can be identified and honored for what it is, not as just another wall decoration. There needs to be some separation from the beer signs and team logos and pix of MMA stars -- or who/whatever. But you seem to understand this, and we're sure you'll do a great job. Thanks again for your patriotism!
Hi, Erik: Yes, you may fly another smaller flag below the U.S. flag on the same staff. It's important that they do not touch, and the separation distance should be about 15% of the length of the U.S. flag (in this case, 9 inches), although you can cheat on this a little if you wish. Thanks for asking!
Hi, Julie: This sounds like a beautiful idea, but unfortunately it is not proper to cut a flag like this. We would try to fold it such that it is "hanging" vertically, with the union in the upper left corner as you face it. Usually it is not proper to place lettering or anything else in front of the flag that would interfere with the full flag receiving a full viewing (aka full respect), but since this is more or less a work of art, we would probably look the other way. Good luck!
- « Previous
- 1
- 2
- …
- 10
- Next »



Comments