How to Properly Display the American Flag
More Like This
Hi, Becca: This is technically OK because what you are referring to is "flag art," but it's not very respectful to just put type in the stripes. A more tasteful albeit still dubious way would be to put your info in little white boxes on top of the flag, which would obscure parts of it but still give the desired background effect. Thanks for asking and good luck!
Hi, Michele: Thanks for taking the time to send this great question, of which we wish we had a better visual concept. But it sounds as though your whole "act" needs to be tightened up. Make sure that the halyard (rope) is as taut as reasonably feasible. At the same time, try to get Old Glory as tight to the rope as possible. Do this by running a small piece of rope or wire through the grommet, through the ring, and around the rope. In other words, tie it to the rope, but do so through the ring, which will keep your tie point from sliding on the rope. Do this for both grommets/rings. One other thing is to make sure that your mounting rings are the same distance apart as the "hoist" (height) of the flag. Sometimes these are too close together, causing the flag to billow horizontally in the middle. One other thing: Some flags are born to wrap and flip, no matter what you do, by virtue of the winds where they happen to be. We know. We own one. Thanks again!
Hi, Barbara: Yes, that would be fine. When it's just one person, you do the best you can to gather it safely and respectively. Then you can carry it inside and temporarily lay it down on a table or whatever (not floor) to fold into the triangle fo proper secure storage. Unfortunately, many people don't take the time to do the triangular fold just for overnight storage, but it really should be done. It takes only a minute more than otherwise. Thanks for asking!
- « Previous
- 1
- 2
- …
- 10
- Next »



Comments